4 Ingredient Peanut Butter Fudge Recipe - Butter with a Side of Bread (2024)

FAQs

Why is my peanut butter fudge not getting hard? ›

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

Fudge usually behaves this way when it's not cooked to a high enough temperature (due to oversight or a faulty candy thermometer). If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.

Coarse grainy fudge results when large crystals are allowed to form. Butter is added in the final stages to add flavor and smoothness and inhibit large crystal formation. Use unsalted butter so you can add a small amount of salt (¼ teaspoon per stick of butter) to the sugar/liquid mixture.

The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

In the microwave - microwave in short increments with a glass of (warm) water, which creates steam for the fudge to absorb, until the fudge no longer feels/looks dried out.

My advice to you is to just pour it in a jar, call it something else delicious, and pretend you meant for it to be that way. The nice thing about my “failed” fudge is that it tastes absolutely delicious! A spoonful of the delectable treat will make you want for more.

Undercooked. This fudge was cooked until the temperature reached only108 °C (226 °F). At this temperature, the sugar is not concentrated enough... there is too much leftover water in the syrup and the resulting fudge is soft.

You can definitely use salted butter and unsalted interchangeably. If a recipe calls for unsalted butter and additional salt, just use a little less of the salt that the recipe calls for. That's the only tweak you need to make!

Choose the right butter – You can use salted or unsalted butter, though using salted gives it a bit of contrast, like salted caramel. If you'd prefer to enjoy the richness of chocolate, choose unsalted butter. Don't over-stir the fudge.

What butter do chefs prefer? ›

European-style butter

European butters have a higher butterfat percentage than American butters, and have become the butters of choice for many chefs, bakers, and passionate home cooks.

If it doesn't boil, your fudge will end up too mushy, and if it cooks for too long, you'll end up with a dry, crumbly mess. This is why many recipes recommend using a candy thermometer, so you know exactly when to remove your mixture from the heat.

If your fudge isnt setting up, cut the amount of butter in half. The problem is the fat from the peanut butter added with the butter adds way to much fat.

Brush the sides of the pan with a wet brush at the beginning of cooking to dissolve sugar crystals stuck to the sides. Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. Use a candy thermometer or conduct a cold water test to check if the fudge is done.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

​Harden the fudge:​ Place your container or tins in the fridge for 2 hours, which is the time it takes for the fudge to set. Once it's hardened, cut the fudge into 12 pieces or remove it from the muffin tins. Store in the fridge or the freezer (if you don't devour it right away).

After your fudge has completely set (this usually takes about four hours on the counter top), remove it from the foil and cut it into squares. If you use a rounded baking pan, cut off just enough of the edge so that the fudge no longer has a rounded edge. Doing this will give every piece of fudge a nice flat bottom.